TitaniumTroy
Well-Known Member
Some interesting new toys for your speakers and subwoofers.
http://www.spatialcomputer.com/page9/page9.html
Spatial HD:
• Remote Measurement - A Spatial Engineer logs on to your Spatial Computer remotely via internet connection to measure your room and speaker separately. Modal response analysis allows us to determine if the chosen speaker location is suitable. FFT analysis allows us to see how the room is altering the speaker's response across the sound spectrum.
• Correction applied - Based on the measured data, correction filters are built and saved in the Spatial system software that offset the changes the room has introduced to the speaker's response at the listening position. The sonic performance of any loudspeaker can be greatly improved with this method.
• No sonic penalty - The correction algorithm is applied to the digital music file directly with 64 bit accuracy, eliminating the quality degradation associated with outboard processors and cables.
• Complete Solution - Combining the finest 24/192K music file playback engine with invisible signal processing to control the speaker create a simple and enjoyable listening experience with advanced online support. Its like we moved into the spare bedroom.
• Firewire and USB DAC Support
Anti-Wave BlackHole Generator:
If we could remove the rear wall of the room, most of the problem would go away, restoring a response similar to the intrinsic response of the speaker itself. The Spatial Black Hole acoustically removes the rear wall. The Black Hole is an active device that measures incoming acoustic energy at the back of the room and propagates an out-of-phase energy pattern to effectively neutralize the resonant behavior of the room and provide much flatter and more natural sounding Bass at the listener position. Low frequency resonant energy also decays slowly in the room, causing the poor Bass articulation and Bass build up in the room. By neutralizing resonant energy, the time domain is much cleaner, providing crisp, detailed Bass.
http://www.spatialcomputer.com/page9/page9.html
Spatial HD:
• Remote Measurement - A Spatial Engineer logs on to your Spatial Computer remotely via internet connection to measure your room and speaker separately. Modal response analysis allows us to determine if the chosen speaker location is suitable. FFT analysis allows us to see how the room is altering the speaker's response across the sound spectrum.
• Correction applied - Based on the measured data, correction filters are built and saved in the Spatial system software that offset the changes the room has introduced to the speaker's response at the listening position. The sonic performance of any loudspeaker can be greatly improved with this method.
• No sonic penalty - The correction algorithm is applied to the digital music file directly with 64 bit accuracy, eliminating the quality degradation associated with outboard processors and cables.
• Complete Solution - Combining the finest 24/192K music file playback engine with invisible signal processing to control the speaker create a simple and enjoyable listening experience with advanced online support. Its like we moved into the spare bedroom.
• Firewire and USB DAC Support
Anti-Wave BlackHole Generator:
If we could remove the rear wall of the room, most of the problem would go away, restoring a response similar to the intrinsic response of the speaker itself. The Spatial Black Hole acoustically removes the rear wall. The Black Hole is an active device that measures incoming acoustic energy at the back of the room and propagates an out-of-phase energy pattern to effectively neutralize the resonant behavior of the room and provide much flatter and more natural sounding Bass at the listener position. Low frequency resonant energy also decays slowly in the room, causing the poor Bass articulation and Bass build up in the room. By neutralizing resonant energy, the time domain is much cleaner, providing crisp, detailed Bass.