1. Welcome to The Audio Annex! If you have any trouble logging in or signing up, please contact 'admin - at - theaudioannex.com'. Enjoy!
    Dismiss Notice
  2. Folks, I'm playing with the behavior of the titles and banners; you may want to read the relevant thread in the Forum Suggestions area.
    Dismiss Notice
  3. HTTPS (secure web browser connection) has been enabled - just add "https://" to the start of the URL in your address bar, e.g. "https://theaudioannex.com/forum/"
    Dismiss Notice

Large 3-way horns

Discussion in 'DIY Projects' started by Wardsweb, Aug 25, 2010.

  1. Wardsweb

    Wardsweb Well-Known Member

    Here are the speakers in my main system. The cabinets are made from MDF and Baltic brich ply with CNC machined Baltic birch internal bracing. The sides are four layers of kerf MDF. I filled these with glass beads that are finer than sand. The woofers are JBL 2235H, the tweeters are JBL 077 and the mids are Altec 802-8G drivers on 511B horns. They are veneered in Sapele Pommele with a gloss DEFT lacquer finish. The feet are machined 6061 billet aluminum.

    [​IMG]
     
  2. Wardsweb

    Wardsweb Well-Known Member

    From the back:

    [​IMG]
     
  3. Botch

    Botch I.Y.A.A.Y.A.S! Superstar

    That veneer is gorgeous!! :drool:
     
  4. Maximo

    Maximo Well-Known Member

    How much do they weigh?
     
  5. Wardsweb

    Wardsweb Well-Known Member

    I will say around 300+ pounds each. You don't want to move them much.
     

Share This Page