1. Welcome to The Audio Annex! If you have any trouble logging in or signing up, please contact 'admin - at - theaudioannex.com'. Enjoy!
    Dismiss Notice
  2. Folks, I'm playing with the behavior of the titles and banners; you may want to read the relevant thread in the Forum Suggestions area.
    Dismiss Notice
  3. HTTPS (secure web browser connection) has been enabled - just add "https://" to the start of the URL in your address bar, e.g. "https://theaudioannex.com/forum/"
    Dismiss Notice

new HSU VTF-15H

Discussion in 'Subwoofers' started by topper, Nov 22, 2010.

  1. topper

    topper Well-Known Member

    [​IMG]

    Amplifier Power 1400 W short term, 350 W continuous
    Hybrid Tuning 16 Hz Ported, 22 Hz Ported or Sealed
    Q Control Range 0.3 - 0.7
    Woofer 15 Inch
    Crossover 30 - 90 Hz, Bypassable
    Crossover Slope 24 dB/Oct
    Phase 0/180
    Total Power Outlet Requirement 430 W, 120/240V
    Ship Weight 123 lbs
    Dimensions 25.0"(h) x 18.0"(w) x 26.0"(d) excluding feet/grille
    Warranty 7-years on woofer, 2-years on electronics
    Designed and Engineered in the U.S.A.



    Introductory price ~ $879 ~ msrp ~ $1,299
    http://www.hsuresearch.com/products/vtf-15h.html

    ( advertised as flat to 10 hz )
    >
     
  2. Maximo

    Maximo Well-Known Member

    Flat to 10hz? Wow. That is a lot of sub for $879.
     
  3. Flint

    Flint "Do you know who I am?" Superstar

    Being flat to 10Hz means nothing by itself. I can make a $100 sub from a 8" woofer which is technically flat to 10Hz. The trick to be flat to 10Hz with high SPL, good dynamics, and low THD. That, if they managed to acheive it, is a pretty big deal at this price.
     
  4. Flint

    Flint "Do you know who I am?" Superstar

    The owner's manual actually states it is flat to 15Hz (+/-2dB) with one port closed.

    This looks like a pretty nice sub, but I will wait for Ilkka or someone similar to test it.
     
  5. topper

    topper Well-Known Member

    ******
    Thanks, Flint. Thats the kind of information (input) I was hoping to get.

    >
     
  6. Batman

    Batman Well-Known Member Staff Member Moderator Famous

    Well after spending several hours on AVS forums reading about this new Sub, it appears to be the best offering HSU has ever had. Since I do not have the time or energy right now to tackle an IB, I decided to pull the trigger and see what a pair of these can do. If for whatever reason these are not to my liking, it doesn't seem as if I'll have any trouble at all re-selling these. Pauly, get ready to head up in a week or so and bring TrueRTA!! We're gonna be having some fun... :music-listening:
     
  7. -B-

    -B- Well-Known Member

    nice...of course it's gonna make me want one.....son of a !!!!
     
  8. Batman

    Batman Well-Known Member Staff Member Moderator Famous

    :text-lol:
     
  9. Batman

    Batman Well-Known Member Staff Member Moderator Famous

    Oh Yeah -B-, come get this GD drum of whatever outta my garage so we can use the hand-truck this time ya bastard!!! :laughing-rolling:
     
  10. PaulyT

    PaulyT Behind the Curtain Staff Member Administrator Moderator Superstar

    That's a possibility actually... Some Sat. afternoon? Maybe we can have a family day.
     
  11. Towen7

    Towen7 Well-Known Member Staff Member Moderator

    What do you think your system is lacking in the bass department? I was rather impressed with how well the PB13 performed.
     
  12. Towen7

    Towen7 Well-Known Member Staff Member Moderator

    And another thing.... I don't see any outputs on the sub's amp. So if your plan is to use them as stereo subs would't you need an external crossover?
     
  13. Zing

    Zing Retired Admin Famous

    If I may, he no longer has the Ultra.


    To do so, I believe he'd have to set his speakers to full range and use the high level connections.
     
  14. Towen7

    Towen7 Well-Known Member Staff Member Moderator

    But he sold the Ultra for a reason right? What was he looking for?

    Okay... but there is no high level output that I can see. So how is he going to get the crossed-over signal to the speakers? I'm clearly missing something.
     
  15. Zing

    Zing Retired Admin Famous

    I guess that's for him to address.



    OK, I see now that those high level connections are inputs only. You're right - there is absolutely no output of any kind on that amp. Unless he has stereo sub outs on his processor, he can't have stereo subs without some sort of outboard crossover. Good catch.
     
  16. Batman

    Batman Well-Known Member Staff Member Moderator Famous

    There are two sub outs on the 5507...
     
  17. Towen7

    Towen7 Well-Known Member Staff Member Moderator

    Can the sub outs on the 5507 be set to L/R channels? I know you know this but for the sake of anyone following that may not... you need independent channels for a true stereo sub application.

    If so where does the LFE channel, and the crossed-over bass for the surround channels go?
     
  18. Zing

    Zing Retired Admin Famous

    Out of curiosity, are those left/right stereo outs or just dual mono outs, effectively eliminating the need for a Y splitter?
     
  19. topper

    topper Well-Known Member

    ***
    Cool. ~ Anxious to get your feedback on how it works out for you, etc, Batman.

    Hope you're happy with them. . . . All indications I've come across indicates you will be.

    :handgestures-thumbup:
     
  20. yromj

    yromj Well-Known Member

    Pauly, correct me if I'm wrong, but from what I remember you and I determined that the outputs were in fact dual mono.

    What do I think a pair of these will do? They will cause you to have all the following reactions:

    :banana-dance: :music-rockout: :scared-eek: :happy-smileygiantred:

    :laughing-rolling:

    and your house to implode. I mean if this thing even matches (let alone that it may very well exceed) the capability of the PBU, two of these on that scene from Matrix: Revolutions would be insane.

    John
     

Share This Page